Management of newborns and healthcare workers exposed to isoniazid-resistant congenital tuberculosis in the neonatal intensive care unit.

BACKGROUND: Management of newborns and healthcare workers (HCWs) exposed to congenital tuberculosis (TB) in the neonatal intensive care unit (NICU) has been reported rarely. AIM: To outline a contact investigation process for individuals exposed to congenital TB in the NICU and investigate nosocomial transmission. Additionally, to assess the efficacy and safety of window prophylaxis in exposed newborns. METHODS: A baby, born at a gestational age of 28 + 1 weeks, was diagnosed with isoniazid-resistant congenital TB on the 39th day of admission to the level IV NICU. Newborns and HCWs exposed cumulatively for ≥8 h underwent contact investigation and follow-up for a year. FINDINGS: Eighty-two newborns underwent contact investigation. All newborns displayed normal chest X-rays, and 42 hospitalized newborns tested negative for acid-fast bacilli stain and Xpert® MTB/RIF assay in their endotracheal sputum or gastric juices. Eighty received window prophylaxis: six of 75 on rifampin experienced mild adverse events, and none of the five on levofloxacin. After 12 weeks, five (6.1%) had a positive tuberculin skin test, all of whom had already received the Bacillus Calmette-Guérin vaccine and tested negative on TB interferon-gamma releasing assay. Of 119 exposed HCWs, three (2.5%) were diagnosed with latent TB infection and completed a four-month rifampin therapy. There was no active TB disease among exposed newborns and HCWs during a one-year follow-up. CONCLUSION: Timely diagnosis of congenital TB is crucial for minimizing transmission among exposed neonates and HCWs in the NICU setting. In cases of isoniazid-resistant index patients, even premature newborns may consider the use of rifampin or levofloxacin for window prophylaxis.

The impact of discontinuing single-room isolation of patients with vancomycin-resistant enterococci: a quasi-experimental single-centre study in South Korea.

OBJECTIVES: There is limited data on the effects of discontinuing single-room isolation while maintaining contact precautions, such as the use of gowns and gloves. In April 2021, our hospital ceased single-room isolation for patients with vancomycin-resistant enterococci (VRE) because of single-room unavailability. This study assessed the impact of this policy by examining the incidence of hospital-acquired VRE bloodstream infections (HA-VRE BSI). METHODS: This retrospective quasi-experimental study was conducted at a tertiary-care hospital in Seoul, South Korea. Time-series analysis was used to evaluate HA-VRE BSI incidence at the hospital level and in the haematology unit before (phase 1) and after (phase 2) the policy change. RESULTS: At the hospital level, HA-VRE BSI incidence level (VRE BSI per 1000 patient-days per month) and trend did not change significantly between phase 1 and phase 2 (coefficient -0.015, 95% confidence interval (CI): -0.053 to 0.023, P=0.45 and 0.000, 95% CI: -0.002 to 0.002, P=0.84, respectively). Similarly, HA-VRE BSI incidence level and trend in the haematology unit (-0.285, 95% CI: -0.618 to 0.048, P=0.09 and -0.018, 95% CI: -0.036 to 0.000, P = 0.054, respectively) did not change significantly across the two phases. CONCLUSIONS: Discontinuing single-room isolation of VRE-colonized or infected patients was not associated with an increase in the incidence of VRE BSI at the hospital level or among high-risk patients in the haematology unit. Horizontal intervention for multi-drug-resistant organisms, including measures such as enhanced hand hygiene and environmental cleaning, may be more effective at preventing VRE transmission.

Multi-peak Light-emitting Diode Curing Units and Polymerization of 3D-printed Crown and Bridge Resin.

PURPOSE: This study aimed to evaluate the substitutive and additive efficacy of multi-peak light-emitting diode (LED) curing units for post-curing of a three-dimensional- (3D-) printed crown and bridge resin. METHODS: A total of 792 disc- and 180 bar-shaped specimens were printed with a crown and bridge resin (NextDent C&B MFH) and post-cured using two LED curing units (VALO Cordless and Bluephase N G4) in fast and standard modes. Conventional post-curing (LC-3D Print Box, Group PC) was compared with LED-only curing (Groups V1, V2, B1, and B2) and LED-combined curing (Groups PV1, PV2, PB1, and PB2) in terms of microhardness, flexural strength, degree of conversion (DC), and CIE L*a*b* color and translucency parameters. Cytotoxicity of the resin eluates was evaluated using the WST-1 assay. Temperature increases on the resin surface were measured with infrared thermography. Data were statistically analyzed using ANOVA and Kruskal-Wallis tests (α=0.05). RESULTS: The microhardness and flexural strength in Groups V1, V2, B1, and DC in all LED-only groups were lower than in other groups (p<0.05). Larger color disparities existed between Group PC and all LED-only groups than between Group PC and the others (p<0.05). There was no significant difference in cytotoxicity among the groups. The temperature increase was lowest in Groups V1 and PV1 during light curing (p<0.05). CONCLUSIONS: Post-curing by multi-peak LED curing units was not as effective as the conventional post-curing device. Additional post-curing by LED curing units did not improve the material properties.

Impact of carbapenem-targeted antimicrobial stewardship interventions: an interrupted time-series analysis.

BACKGROUND: The development of carbapenem-resistant Gram-negative bacilli (CR-GNB) is largely favoured by indiscriminate and prolonged carbapenem use, which is a significant contributing factor. AIM: To evaluate the impact of two carbapenem antibiotic stewardship programme interventions on both carbapenem prescriptions and the clinical isolation rates of CR-GNBs, using interrupted time-series analysis. METHODS: A time-series analysis was performed using data for carbapenem usage from a tertiary hospital in South Korea from January 2017 to July 2022. Two carbapenem antibiotic stewardship programme interventions were implemented sequentially: (i) a prospective audit and feedback (PAF) from November 2018 to April 2020 (intervention 1), and (ii) preauthorization from May 2020 to August 2020 (intervention 2). Monthly carbapenem usage and incidence of CR-GNB before and after each intervention were compared using an autoregressive integrated moving average model. FINDINGS: Implementation of PAF resulted in a significant reduction in carbapenem consumption, followed by an additional decrease after the preauthorization was implemented. The incidence of carbapenem-resistant Escherichia coli and Klebsiella pneumoniae increased after intervention 1, but there was a significant change from an increasing trend to a stationary trend after intervention 2. The incidence of carbapenem-resistant Pseudomonas aeruginosa, which had increased during the baseline period, became stationary after intervention 1. A significant decrease was observed in the incidence of carbapenem-resistant Acinetobacter baumannii during the implementation of intervention 1 and 2. CONCLUSION: This study emphasizes the importance of adopting comprehensive antibiotic management and rigorous infection control to prevent infections caused by antibiotic-resistant bacteria.

Appropriateness of antibiotic use for patients with asymptomatic bacteriuria or urinary tract infection with positive urine culture: a retrospective observational multi-centre study in Korea.

BACKGROUND: Antibiotic resistance threatens public health worldwide, and inappropriate use of antibiotics is one of the main causes. AIM: To evaluate qualitative use of antibiotics in asymptomatic bacteriuria (ABU) and urinary tract infection (UTI). METHODS: Cases of positive urine culture (≥105 colony-forning units/mL) performed in inpatient, outpatient and emergency departments in April 2021 were screened in 26 hospitals in the Republic of Korea. The cases were classified as ABU, lower UTI and upper UTI. The appropriateness of antibiotic use was evaluated retrospectively by infectious disease specialists using quality indicators based on clinical guidelines for ABU and UTI. RESULTS: This study included a total of 2697 patients with ABU or UTI. The appropriateness of antibiotic use was assessed in 1157 patients with ABU, and in 677 and 863 patients with lower and upper UTI, respectively. Among the 1157 patients with ABU, 251 (22%) were prescribed antibiotics without appropriate indications. In 66 patients with ABU in which antibiotics were prescribed with appropriate indications, the duration was adequate in only 23 (34.8%) patients. The appropriateness of empirical and definite antibiotics was noted in 527 (77.8%) and 353 (68.0%) patients with lower UTI, and 745 (86.3%) and 583 (78.2%) patients with upper UTI, respectively. The duration of antibiotics was adequate in 321 (61.8%) patients with lower UTI and 576 (78.7%) patients with upper UTI. CONCLUSIONS: This nationwide qualitative assessment of antibiotic use in ABU and UTI revealed that antibiotics were often prescribed inappropriately, and the duration of antibiotics was unnecessarily prolonged.

Fabrication of THz corrugated wakefield structure and its high power test.

We present overall process for developing terahertz (THz) corrugated structure and its beam-based measurement results. 0.2-THz corrugated structures were fabricated by die stamping method as the first step demonstration towards GW THz radiation source and GV/m THz wakefield accelerator. 150-[Formula: see text]m thick disks were produced from an OFHC (C10100) foil by stamping. Two types of disks were stacked alternately to form 46 mm structure with [Formula: see text] 170 corrugations. Custom assembly was designed to provide diffusion bonding with a high precision alignment of disks. The compliance of the fabricated structure have been verified through beam-based wakefield measurement at Argonne Wakefield Accelerator Facility. Both measured longitudinal and transverse wakefield showed good agreement with simulated wakefields. Measured peak gradients, 9.4 MV/m/nC for a long single bunch and 35.4 MV/m/nC for a four bunch trains, showed good agreement with the simulation.

Risk of transmission of COVID-19 from healthcare workers returning to work after a 5-day isolation, and kinetics of shedding of viable SARS-CoV-2 variant B.1.1.529 (Omicron).

BACKGROUND: There have been limited data on the risk of onward transmission from individuals with Omicron variant infections who return to work after a 5-day isolation. AIM: To evaluate the risk of transmission from healthcare workers (HCWs) with Omicron variant who returned to work after a 5-day isolation and the viable-virus shedding kinetics. METHODS: This investigation was performed in a tertiary care hospital, Seoul, South Korea. In a secondary transmission study, we retrospectively reviewed the data of HCWs confirmed as COVID-19 from March 14th to April 3rd, 2022 in units with five or more COVID-19-infected HCWs per week. In the viral shedding kinetics study, HCWs with Omicron variant infection who agreed with daily saliva sampling were enrolled between February and March, 2022. FINDINGS: Of the 248 HCWs who were diagnosed with COVID-19 within 5 days of the return of an infected HCW, 18 (7%) had contact with the returned HCW within 1-5 days after their return. Of these, nine (4%) had an epidemiologic link other than with the returning HCW, and nine (4%) had contact with the returning HCW, without any other epidemiologic link. In the study of the kinetics of virus shedding (N = 32), the median time from symptom onset to negative conversion of viable virus was four days (95% confidence interval: 3-5). CONCLUSION: Our data suggest that the residual risk of virus transmission after 5 days of isolation following diagnosis or symptom onset is low.

The effect of the national scaling program on tooth loss: a claim-based matched large cohort study in Korea.

OBJECTIVE: Tooth loss affects quality of life. Scaling is a measure to prevent periodontal disease and tooth loss. This study aimed to determine the effect of scaling on tooth loss. BASIC RESEARCH DESIGN: Secondary analysis of the Korean National Health Insurance Services database, comprising 514,866 Koreans as an initial cohort, followed for 14 years up to 2015. The study population comprised people who had received an oral check-up in 2002-2003. Using propensity score matching, we matched the intervention group (receipt of scaling) and controls (no scaling) 1:1. The outcome, tooth loss was defined as including all teeth except for third molars until 2015. The final sample included 94,738 people. Analysis used a Cox proportional hazard regression model. RESULTS: Scaling showed conflicting results in univariate and multivariable analyses. In univariate analysis, people who received scaling were more likely to lose teeth (HR, 1.04; 95% CI, 1.02-1.05). After adjusting for confounders in the multivariable analysis, those who didn't receive scaling were more likely to lose teeth (HR, 0.97; 95% CI, 0.95, 0.99). The effects of scaling were identified in people without diabetes (HR, 0.97; 95% CI, 0.95, 0.99) but not in people with diabetes (HR, 0.97; 95% CI, 0.89-1.06). CONCLUSIONS: Scaling was associated with less tooth loss. Regular scaling might be encouraged for vulnerable groups, such as males, older adults, lower income, handicapped, chronic diseases, and smokers.

Redox-labelled electrochemical aptasensors with nanosupported cancer cells.

The transfer of redox-labelled bioelectrochemical sensors from proteins to cells is not straightforward because of the cell downward force issue on the surface of the sensors. In this paper, 20-nm-thick nanopillars are introduced to overcome this issue, in a well-controlled manner. We show on both molecular dynamics simulations and experiments that suspending cells a few nanometers above an electrode surface enables redox-labelled tethered DNA aptamer probes to move freely, while remaining at an interaction distance from a target membrane protein, i. e. epithelial cell adhesion molecule (EpCAM), which is typically overexpressed in cancer cells. By this nanopillar configuration, the interaction of aptamer with cancer cells is clearly observable, with 13 cells as the lower limit of detection. Nanoconfinement induced by the gap between the electrode surface and the cell membrane appears to improve the limit of detection and to lower the melting temperature of DNA aptamer hairpins, offering an additional degree of freedom to optimize molecular recognition mechanisms. This novel nanosupported electrochemical DNA cell sensor scheme including Brownian-fluctuating redox species opens new opportunities for the design of all-electrical sensors using redox-labelled probes.

Microstructure and Texture in Copper Filled Millimeter Scale Through Silicon Vias.

The microstructure and crystallographic texture of copper electrodeposits in millimeter scale through silicon vias are characterized using electron backscatter diffraction. The deposits obtained from additive-containing CuSO4-H2SO4 electrolytes are characteristic of the superconformal deposition process, with growth textures and columnar grains consistent with previous findings in smaller TSV. The microstructure, like the filling evolution it records, changes substantially with chloride concentration for the concentrations of polymer suppressor used. With chloride concentrations of 80 µmol·L-1 and less, columnar grains of Cu capture the linear motion of the local growth front during filling with a strong <110> orientation along the elongated grain axes typical of deposition in chloride-containing Cu electrolytes. In the mid- and upper- via locations these columnar grains are angled upward from the sidewalls toward the center of the v-shaped growth front. In a limited region adjacent to the via bottom they extend vertically from the bottom surface. With millimolar chloride concentration, deposition also exhibits columnar grains with preferred <110> growth orientation in the lower region of the via and adjacent to the sidewalls. However, separation of the central deposit from the sidewalls results in a convex geometry of the growth front and spatially varying texture in most of the deposit.

Clustering and multiple-spreading events of nosocomial severe acute respiratory syndrome coronavirus 2 infection.

BACKGROUND: There is growing evidence that super-spreading events (SSEs) and multiple-spreading events (MSEs) are a characteristic feature of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. However, data regarding the possibility of SSEs or MSEs in healthcare settings are limited. METHODS: This study was performed at a tertiary-care hospital in Korea. We analysed the nosocomial COVID-19 cases that occurred in healthcare workers and inpatients and their caregivers between January and 20th December 2020. Cases with two to four secondary cases were defined as MSEs and those with five or more secondary cases as SSEs. FINDINGS: We identified 21 nosocomial events (single-case events, N = 12 (57%); MSE + SSE, N = 9 (43%)) involving 65 individuals with COVID-19. Of these 65 individuals, 21 (32%) were infectors. The infectors tended to have a longer duration between symptom onset and diagnostic confirmation than did the non-infectors (median two days vs zero days, P=0.08). Importantly, 12 (18%) individuals were responsible for MSEs and one (2%) for an SSE, which collectively generated 35 (54%) secondary cases. CONCLUSION: In a hospital with thorough infection-control measures, approximately 70% of the nosocomial cases of COVID-19 did not generate secondary cases, and one-fifth of the infectors were responsible for SSEs and MSEs, which accounted for approximately half of the total cases. Early case identification, isolation, and extensive contact tracing are important for the prevention of transmission and SSEs.

Nickel, chromium and methyl methacrylate monomer release from orthopaedic functional appliances.

AIM: This study was purposed to evaluate release of nickel and chromium ions and methyl methacrylate (MMA) monomers from functional appliances and their possible health effects. MATERIALS AND METHODS: Study design: Twin-block appliances and Bionators were immersed in artificial saliva and kept in a thermal incubator. Control group was established as artificial saliva without appliances. Artificial saliva was analysed after 7 days, 30 days and 90 days. Inductively coupled plasma mass spectrometry and gas chromatography-mass spectrometry was used for detection of nickel and chromium ions and MMA monomers. MTT assays and cytokine array were performed. STATISTICS: One way ANOVA with Tukey test and Dunnett's T3 for post-hoc analysis was used for evaluation of time-dependent changes and independent t-test was used for evaluation of MTT assay results. RESULTS: The results revealed that metal ions and MMA monomers are released from the appliances. Metal ion detection pattern was irregular and could not be analysed. Twin-block group showed significantly larger amount of MMA release. MTT assay revealed statistically significant but minimally reduced cellular activity on Bionator and twin-block groups compared to control groups. Cytokine array showed no or less inflammatory cytokine release on Bionator and twin-block groups. CONCLUSION: MMA monomer release was confirmed but the cytotoxic effect of functional appliance material release is minimal or negligible. General toxicity of the functional appliance from the MMA monomer release is likely to be minimal or negligible.